Portable Ultrasonic Flowmeter UFP-20 Ver1.33 Firmware Update Data Application

お問い合わせフォーム

We recommend that you perform a firmware update to ensure optimal use of the UFP-20.
In order to perform a firmware update, please fill in the necessary information from the form below and request a firmware update.
We will send you the file download address via email you filled in.
If you are in a hurry, please contact us via phone or facsimile.
(TOKYO KEIKI INC. Measurement Systems Company TEL.+81-3-3737-8664 FAX.+81-3-3737-8665)

The current latest version is as follows:

CPU Ver.1.33
DSP Ver.1.09

(Note) When using CPU firmware Ver.1.10 or later, please use DSP firmware Ver.1.08 or later.
(Note) If the CPU Version is less than 1.06, you cannot update by yourself. If you request the up date the CPU and DSP version, the main unit must be returned to Tokyo Keiki Inc.

The marked area(※) must be filled.

UFP-20 Main Unit Serial Number ※	(The serial number is written on the seal on the back of the main unit.） This area is required.
UFP-20 CPU Version ※	(YOU can find the CPU and DSP Versions on the boot screen.） This area is required.
UFP-20 DSP Version ※	The person in charge is required.
Name of organization / company ※	This area is required.
Department name
Job title
Name ※	This area is required.
Address ※	This area is required.
Country ※	This area is required.
Phone number ※	This area is required.
Facsimile number
e-mail Address ※	This area is required.
Verify your e-mail Address ※	This area is required. Email address does not match.
Supplier's information	Please fill in your supplier's information below.
Supplier (Please fill in as much as you can understand)	Company name
Department name
Name of the person in charge
Postal code
City, street address
Building name
Phone number
Facsimile number
e-mail Address
【Notes】 ※	In principle, we cannot accept transactions with countries subject to the UN Economic Sanctions Resolution or regions (Iran, Iraq, North Korea) in attached Table 4 of the Export Trade Control Order. This product is subject to export regulations stipulated in the Foreign Exchange and Foreign Trade Act. If you intend to export goods or provide technology to non-residents that meet the requirements stipulated in the Export Trade Control Order, the Foreign Exchange Ordinance, or other relevant laws, please obtain permission from the Minister of Economy, Trade and Industry. Please submit the application data after agreeing to the above [Notes.] I agree with [Notes]. This area is required.

The personal information you submit will be used to make inquiries, answer questions, and provide information.
If the e-mail is incorrect, any information will not be sent. Please check your e-mail again.