ARIORES

製品詳細

Inquiry

At present, the electromagnetic device ARIORES is used for all purposes.

Prevention and elimination of scale/silica/rust (rust-colored water) within piping.
Maintenance and lengthening the life (deterioration prevention) of piping of plumbing/hot and cold water/cooling water and relevant apparatus.
Peeling of fixed dust on the heating surface of boiler, power saving in maintenance management.
Growth inhibition of general bacteria or Legionella bacteria etc.

Mechanism of ARIORES

Relationship between an electric current and a magnet

When the magnet with the north pole and the south pole of is mounted outside the piping, an electric current induced according to Faradayʼs law of electromagnetic induction flows along the piping wall.

Piping mounting drawing of ARIORES

By enhancing its action through further conduction of weak current, ARIORES softens and dissolves the scale adhered to inner wall of piping by electrolysis, Lorentz force(F=qBV) generated by electromagnetic induction acts in the direction to remove and disperse the scale and then removes the adhered scale.

Product lines of electromagnetic device ARIORES

S type outline drawing 32A

Source of electricity used : AC100V ‒ AC240V 50/60Hzc
Working current : DC6V80mA
Piping used : From 20A to 40A
Weight of electric field part : 1.8kg
Weight of magnetic field part : From 2kg to 3kg

A type outline drawing 50A

Source of electricity used : AC100V- AC240V 50/60Hz
Working current : DC10V800mA
Piping used : From 50A to 80A
Weight of electric field part : 4kg
Weight of magnetic field part : 6.5kg

L type outline drawing 200A

Source of electricity used : AC100V- AC240V 50/60Hz
Working current : DC10V800mA
Piping used : From 100A to 250A
Weight of electric field part : 4kg
Weight of magnetic field part : From 8.5kg to 18.5kg

Example of mounting construction of ARIORES

In the case of the piping with heat insulation or racking (hotel/water supply pip/mounting ARIORES L type 100A)

In the case of iron pipe (supermarket/cooling water pipe/ mounting ARIORES L type 200A)

In the case of vinyl chloride pipe
(warm bath facility/circulation piping)

Mounting ARIORES by winding steel plate around vinyl chloride pipe

In the case of SUS piping
(factory/solution pipeline)

Mounting ARIORES by coating steel plate around SUS piping

In the case of buried pipe
(elderly nursing home/water distributing pipe for well)

Mounting the magnetic field part of ARIORES and burying with anticorrosive treatment

In the case of mounting outdoors

The magnetic field part of ARIORES is mounted being stored in a case

Picture, Document provided by ANES CO.,LTD.

back

*Design and specifications are subject to change without notice.