本文へスキップします。

【全:英】ロゴ
【全:英】ヘッタリンク
  • Standard
  • Large
【全:英】サイト内検索
【全:英】多言語リンク
H1

Flat Radar Level Sensor MRF-10

製品詳細
Features
  1. IP68 submergible
    Stormwater will not break MRF-10 by under the water.
  2. Compact body (Height: 54mm)
    Height: 54mm, easy installation for narrow space like under the Manhole
  3. Loop-Powered
    Easy replacement to existing Loop-powered instrumentations
  4. HART communication
    HART protocol has been superimposed onto analog output
  5. Easy Configuration
    Graphical PC software by HART
  6. Simple one-piece structure
    No independent main console required

Operation Manual

Specifications

General Measuring principle Time of Flight Impulse Radar Technology
Operating frequency 5.8GHz
Half power beam angle Lengthwise: 50°/ Crosswise: 23°
Display /Configuration No display / Graphical PC Configuration available
Electrical Power supply Loop-powered 16 ~ 36V DC
Output Analog: 4-20mA + Digital: HART Protocol
Output variable Level,  Ullage (m or ft), Volume(%), Amplitude (dB)
Signal on alarm Hold, Low (3.9mA), High (22mA)
Others Arrester and 10m shielded twisted 3 - cores Cable are built-in.
Mechanical Housing (Enclosure) Body: Casting stainless steel (316 equivalent)/Antenna face: FRP
Size 172 x 192 x 54mm (without Cable gland)
Mass Approx. 2.7kg (without Cable)
Environment Ambient temperature  -20℃ ~ 70℃ (-4°F ~ 158°F)
Ambient pressure ATM
Protection degree IEC 60529 IP68 (10m Depth /24hr.)
Measuring Performance Accuracy ±5mm (0.1 - 5m range)
±10mm (5 - 10m range)
Repeatability ±1mm
Update interval 1sec
Measuring range Up to 10m Max.
Applicable circular channel: more than φ400mm

back

*Design and specifications are subject to change without notice.